KOMFI

JUNIOR 36

Machine Characteristics

Basic configuration

  • Feeder: Manual feeding, automatic overlap control, mis-feeding detection.
  • Laminating Unit: IR heating with temperature sensor, adjustable spread roller, rubber-coated pressure roller, adjustable stoppers, pneumatic pressure system.
  • Separator & Delivery: De-curling unit, film perforator, skewing wheel, snapping unit with fixed speed, fixed delivery desk.

SW functions included

  • Zero overlap option for thick sheets processing.
  • Choice of measuring units.
  • Intuitive user interface with built-in diagnostics and troubleshooting.

Options

  • Auxiliary piston compressor if central air supply is not available.
  • External automatic sheet feeder for later upgrade.
  • Teflon coated pressure roller with non-sticking surface to reduce film or duplex print marking.
  • Airshaft for easier changeover of laminates.
  • Film slitter to cut film roll to the required width.
  • Additional On roll perforator.
  • Effect foiling device with possibility to apply PSA film too.
  • 1″ unwinding shaft for effect films.
  • Automatic skew wheel for reliable separation of difficult films.
  • Air ionizer for smooth sheets unloading without static charge.
  • Roll lift for comfortable handling of laminating film rolls.

Technical specifications

Parameter Value
Speed
15 m/min = 2000 SRA3 sheets/h
Max sheet size
36 x 80 cm
Paper weight
115-350 g/m²
Machine dimensions (delivery desk included)
277 x 77 x150 cm
 
Min. sheet dimensions
20 × 20 cm
Thickness of laminating film
24-50 μm
Kind of laminating film
OPP, PET, Nylon, PVC
Time of laminating cylinder warm up
Approx . 3.5 min
Sheet overlap accuracy
±1 mm
Air connection
Min. 6 bar
Consumption of compressed air
8 l/min
Max. consumption of compressed air
8 l/min
Max. pressing force
12.8 kN
Max. linear nip pressure
35.5 N/mm
Max. consumption of electricity
2.5 kW
Power supply (EU version)
2.8 kVA
Power supply (US version)
3.1 kVA
Machine weight
240 kg
Recommended machine capacity
100 000 sheets/month
Parametr Hodnota
Min. rozměry archů
20 × 20 cm
Tloušťka laminovací fólie
24-50 μm
Druh laminovací fólie
OPP, PET, Nylon
Doba zahřátí laminovacího válce
Cca. 3.5 min
Přesnost přesahu archů
±1 mm
Vzduchová přípojka
Min. 6 bar
Spotřeba tlakového vzduchu
8 l/min
Max. spotřeba tlakového vzduchu
8 l/min
Max. přitlačovaná síla
12.8 kN
Max. lineární tlak v nipu
35.5 N/mm
Max. spotřeba elektřiny
2.1 kW
Napájení (verze EU)
2.6 kVA
Zdroj napájení (americká verze)
3.1 kVA
Hmotnost stroje
240 kg
Doporučená kapacita stroje
100 000 archů/měsíc

Custom-built solutions

Possibility of individual machine modification based on specific requirements

Downloads

For other brochures please visit the download section.

* Technical parameters of our products are subject to change without prior notice.
* Product pictures/videos may show additional options not included in the standard delivery.