KOMFI

AMIGA 52 TANDEM DOUBLE

Machine Characteristics

Basic configuration

  • Feeder
    • Feeding head with a set of separating air nozzles and mechanical separators.
    • Adjustable guide plates for processing thin sheets.
    • Overlap sensor to protect the pressure roller from sticking film in case of a gap between sheets.
  • Laminating unit
    • Adjustable laminating unit spacers allow processing of thick sheets and window lamination.
    • Two laterally adjustable expansion unwind shafts with adjustable brake for film tension on the spread roller.
    • A pair of height-adjustable and removable spread rollers perfectly smooth and tension the film before applying it to the printed material.
    • IR heating of the laminating rollers, controlled by a temperature sensor in the cylinder wall, allows precise temperature control.
    • The laminating units are equipped with rubber coated pressure rollers.
    • The powerful pneumatic pressure system guarantees even pressure and perfect lamination results.
  • Separator & delivery
    • Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed.
    • Built-in film perforator for top side lamination and on-roll perforator for bottom side lamination.
    • The cam driven separating roller with adjustable bursting action is complemented by an automatically cycling skew wheel and together they ensure a clean separation of the two laminating films.
    • Fixed inclined delivery table with adjustable air nozzles.
    • Control system with advanced built-in functions, colour touch screen display complemented by a set of hardware buttons according to the relevant standards.

SW functions included

  • Stop on the sheet overlap to avoid waste sheets.
  • Zero overlap option allows processing of higher thickness substrates.
  • Automatic detection of pressure and temperature drop prevents irregularity in lamination quality.
  • The “end of job “function makes it easy to rewind the sheet onto the film reel.
  • Job settings memory.
  • Built-in internet connection for providing service support.
  • Sensor for sheet separation detection and jam detection.
  • Intuitive control panel with built-in diagnostics for key fault conditions and troubleshooting instructions.

Options

  • Top and bottom preheating of sheets prior to lamination to increase adhesion and print durability.
  • Extended life polyurethane pressure roller.
  • Teflon pressure roller with non-stick surface prevents double-sided printing or foil sticking to the surface of the roller. It also significantly reduces the need for cleaning.
  • Film slitter for top or bottom lamination.
  • Additional on-roll perforator.
  • Accessories for applying effect film with the possibility of applying PSA laminate.
  • 1″ unwinding shaft for effect foils.
  • Autopilot that monitors sheet and film capacity on the machine. Practical solution especially in plants, where one operator works on several machines.
  • Anti-static bar removes static charge from the separator and prevents thin sheets wrapping around the separating roller.
  • The air ionizer helps to unload sheets smoothly onto the delivery unit without static charge.
  • Jogging table.
  • Automatic pallet stacker.
  • Roll lift – allows easy handling of spare rolls of laminating film.

Technical specifications

Parameter Feeding head
Max. speed of lamination
25 m/min
Max. output of the feed. head
8000 sheets/h
Min. sheet dimensions
20 × 20 cm
Max. sheet dimensions
56 × 80 cm
Paper weight
115-600 g/m²
Paper thickness
Max 0.7 mm (with overlap >0) Max 1.4 mm (with overlap <0)
Max. paper pile
52 cm (max. 300 kg)
Thickness of laminating film
24-45 µm
Kind of laminating film
OPP, PET, Nylon
Time of laminating roll warm up
Approx. 4 min
Sheet overlap accuracy
0.8 mm
Machine dimensions incl. table (lxwxh)
341 × 1002 × 147 cm
Air supply
Min. 6 bar
Consumption of compressed air
65 l/min
Max. consumption of compressed air
95 l/min
Max. pressing force
2 x 15 kN
Max. linear nip pressure
2x 39.4 N/mm
Max. consumption of electricity
10.5 kW
Power supply
6 kVA
Machine weight
878 kg
Recommended machine capacity
100 000 sheets/month
Parameter Feeding head
Max. speed of lamination
25 m/min
Max. output of the feed. head
8000 sheets/h
Min. sheet dimensions
20 × 20 cm
Max. sheet dimensions
56 × 80 cm
Paper weight
115-600 g/m²
Paper thickness
Max 0.7 mm (with overlap >0) Max 1.4 mm (with overlap <0)
Max. paper pile
52 cm (max. 300 kg)
Thickness of laminating film
24-45 µm
Kind of laminating film
OPP, PET, Nylon
Time of laminating roll warm up
Approx. 4 min
Sheet overlap accuracy
0.8 mm
Machine dimensions incl. table (lxwxh)
341 × 1002 × 147 cm
Air supply
Min. 6 bar
Consumption of compressed air
65 l/min
Max. consumption of compressed air
95 l/min
Max. pressing force
2 x 15 kN
Max. linear nip pressure
2x 39.4 N/mm
Max. consumption of electricity
10.5 kW
Power supply
6 kVA
Machine weight
878 kg
Recommended machine capacity
100 000 sheets/month

Download

For other brochures please visit the download section.

* Technical parameters of our products are subject to change without prior notice.
* Product pictures/videos may show additional options not included in the standard delivery.