KOMFI

AMIGA 52

Machine Characteristics

Basic configuration

  • Feeder
    • Komfi single action feeding head.
    • Adjustable guide plates for thin sheets processing.
    • Sheet overlap sensor to protect the pressure roller from the laminate adhesive sticking.
    • Air compressor to ensure sufficient supply of compressed air and vacuum for sheet feeding and delivery.
  • Laminating unit
    • Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination.
    • Side-adjustable unwinding shaft with adjustable brake force.
    • Height-adjustable and removable spread roller perfectly removes wrinkles from laminate.
    • IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation.
    • Rubber coated pressure roller.
    • The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results.
  • Separator & delivery
    • Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed.
    • Built-in film perforator to enable sheet separation.
    • Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel.
    • Fixed delivery desk with adjustable air nozzles.

SW functions included

  • Stop on the sheet overlap to avoid waste sheets.
  • Zero overlap possibility for processing thick substrates.
  • Pressure and temperature drop detection to prevent irregularity in lamination quality.
  • End of job function for easy rewind of film.
  • Sensor for sheet separation detection and jam detection.
  • Job settings memory.
  • Built-in internet connectivity for service support.

Options

  • The Intelligent Bottom feeder machine version for short runs allows sheets to be laden on-fly. It can be used in two modes: as a manually fed bottom suction feeder or connected into a line with a printer for continuous run.
  • Sheet preheater to increase durability and adhesion of lamination.
  • Polyurethane pressure roller for longer roller life.
  • Teflon pressure roller with non-sticking surface to reduce film or duplex print marking.
  • Film slitter to cut the laminate on requested width.
  • Additional On roll perforator.
  • Effect foiling device with possibility to apply PSA film too.
  • 1″ unwinding shaft for effect films.
  • Autopilot to monitor and control supply of paper and film. Useful in workshops where one person operates more than one equipment.
  • Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging.
  • Antistatic bar removes static charge from the separator and prevents from thin sheets wrapping onto the rollers.
  • Air ionizer for smooth sheets unloading without static charge.
  • Jogging table.
  • Stacker.
  • Roll lift for comfortable handling of laminating film rolls.

Technical specifications

ParameterFeeding head
Max. speed of lamination
25 m/min
Max. output of the feed. head
8000 sheets/h
Min. sheet dimensions
20 × 20 cm
Max. sheet dimensions
56 × 80 cm
Paper weight
Paper thickness
115-600 g/m²
Max 0.7 mm (with overlap >0
Max 1.4 mm (with overlap <0)
Max. paper pile
50 cm (max. 300 kg)
Thickness of laminating film
24-50 μm
Kind of laminating film
OPP, PET, Nylon
Time of laminating roll warm up
Approx. 4 min
Sheet overlap accuracy
0.8 mm
Machine dimensions incl. table (lxwxh)
245 × 99 × 160 cm
Machine dimensions incl. stacker
356 × 117 × 157 cm
Air supply
Min. 6 bar
Consumption of compressed air
60 l/min
Max. consumption of compressed air
60 l/min
Max. pressing force
15 kN
Max. linear nip pressure
26,8 N/mm
Max. consumption of electricity
5.5 kW
Power supply
6 kVA
Machine weight
650 kg
Recommended machine capacity
100 000 sheets/month
ParameterVacuum feeder
Max. speed of lamination

15 m/min

Max. output of the feed. head
N/A
Min. sheet dimensions
20 × 20 cm
Max. sheet dimensions
52 × 74 cm
Paper weight
Paper thickness
115-600 g/m²
Max 0.7 mm (with overlap >0
Max 1.4 mm (with overlap <0)
Max. paper pile
3cm (depending on sheet length)
Thickness of laminating film
24-50 μm
Kind of laminating film
OPP, PET, Nylon
Time of laminating roll warm up
Approx. 3.5 min
Sheet overlap accuracy
0.8 mm
Machine dimensions incl. table
256 × 122 × 160 cm
Machine dimensions incl. stacker
356 × 122 × 160 cm
Air supply
Min. 6 bar
Consumption of compressed air
10 l/min
Max. consumption of compressed air
10 l/min
Max. pressing force
15 kN
Max. consumption of electricity
39.4 N/mm
Max. spotřeba el. energie
 
Power supply
5,5 kVA
Machine weight
561 kg
Recommended machine capacity
100 000 sheets/month
Parametr Hodnota
Max. rychlost laminace
15 m/min
Max. výkon nakl. hlavy
N/A
Min. rozměr archů
20 × 20 cm
Max. rozměr archů
52 × 74 cm
Hmotnost archů
115-350 g/m²
Max. výška stohu nakladače
3 cm
Tloušťka laminovací fólie
24-50 μm
Typ laminovací fólie
OPP, PET, Nylon
Čas vytopení laminovacího válce
cca 3.5 min
Přesnost přesahu archů
±2 mm
Rozměry stroje včetně stolu
256 × 122 × 160 cm
Rozměry stroje včetně stohovače
356 × 122 × 160 cm
Vzduchová přípojka
Min. 6 bar
Spotřeba tlakového zduchu
10 l/min
Max. spotřeba tlak. vzduchu
10 l/min
Max. přítlačná síla
20.5 kN
Max. lineární tlak v nipu
39.4 N/mm
Max. spotřeba el. energie
Příkon
5,5 kVA
Hmotnost stroje
445 kg
Doporučené zatížení stroje
100 000 archů/měsíc

Custom-built solutions

  • Machine Amiga 52 with modification for embossing (solution with replaceable laminating cylinder) is custom-built only. The technical parameters can differ from standard configuration.
  • Possibility of individual machine modification based on specific requirements.

Downloads

For other brochures please visit the download section.

* Technical parameters of our products are subject to change without prior notice.
* Product pictures/videos may show additional options not included in the standard delivery.