Amiga 52 en - KOMFI

AMIGA 52

Machine Characteristics

Basic configuration

Feeder:

Komfi single action feeding head.
Adjustable guide plates for thin sheets processing.
Sheet overlap sensor to protect the pressure roller from the laminate adhesive sticking.
Air compressor to ensure sufficient supply of compressed air and vacuum for sheet feeding and delivery.

Laminating Unit:

Adjustable distance stoppers for lamination unit to enable processing thick substrates
and windows lamination.
”On-the-fly” side-adjustable unwinding shaft with adjustable brake force.
Height-adjustable and removable spread roller perfectly removes wrinkles from laminate.
IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation.
Rubber coated pressure roller.
The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results.

Separator & Delivery:

Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed.
Built-in film perforator to enable sheet separation.
Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel.
Fixed delivery desk with adjustable air nozzles.

SW functions included

Stop on the sheet overlap to avoid waste sheets.
Zero overlap possibility for processing thick substrates.
Pressure and temperature drop detection to prevent irregularity in lamination quality.
End of job function for easy rewind of film.
Sensor for sheet separation detection and jam detection.
Job settings memory.
Built-in internet connectivity for service support.

Options

The Intelligent Bottom feeder machine version for short runs allows sheets to be laden on-the-fly. It can be used in two modes: as a manually fed bottom suction feeder or connected into a line with a printer for continuous run.
Sheet preheater to increase durability and adhesion of lamination.
Two-zone IR heater.
Polyurethane pressure roller for longer roller life.
Teflon pressure roller with non-sticking surface to reduce film or duplex print marking.
Film slitter to cut the laminate on requested width.
Additional On roll perforator.
Integrated Effect foiling device (OTF) with possibility to apply PSA film too.
External Effect foiling device (OTF).
1″ unwinding shaft for effect films.
Autopilot to monitor and control supply of paper and film (bottom feeder version).
Useful in workshops where one person operates more than one equipment.
Hot knife option for perfect separation of thick, PET and Nylon films that eliminates film flagging.
Antistatic bar removes static charge from the separator and prevents from thin sheets wrapping onto the rollers.
Air ionizer for smooth sheets unloading without static charge.
Jogging table.
Automatic sheet stacker.
Roll lift for comfortable handling of laminating film rolls.

Technical specifications

AMIGA 52 + FEEDING HEAD
AMIGA 52 + VACUUM FEEDER

Parameter	Feeding head
Max. speed of lamination	25 m/min
Max. output of the feed. head	8000 sheets/h
Min. sheet dimensions	200 × 200 mm
Max. sheet dimensions	560 × 800 mm (or up to 1016 mm)
Paper weight Paper thickness	115-600 g/m² Max 0.7 mm (with overlap >0) Max 1.4 mm (with overlap <0)
Max. paper pile	52 cm (max. 300 kg)
Thickness of laminating film	24-50 μm
Kind of laminating film	OPP, PET, Nylon
Time of laminating roll warm up	3-5 min (EU)
Sheet overlap accuracy	±1 mm
Machine dimensions incl. delivery desk	2.63 × 1.00 m
Machine dimensions incl. stacker	352 × 125 × 147 cm
Air supply	Min. 6 bar
Consumption of compressed air	65 l/min
Max. consumption of compressed air	95 l/min
Max. pressing force	15 kN
Max. linear nip pressure	26,8 N/mm
Max. consumption of electricity	7 kW
Power supply	7 kVA
Machine weight	650 kg
Recommended machine capacity	100 000 sheets/month

Parameter	Vacuum feeder
Max. speed of lamination	25 m/min
Max. output of the feed. head	8000 sheets/h
Min. sheet dimensions	200 × 250 mm
Max. sheet dimensions	560 × 800 mm (or up to 1016 mm)
Paper weight Paper thickness	115-600 g/m² Max 0.7 mm (with overlap >0) Max 1.4 mm (with overlap <0)
Max. paper pile	6 cm (depending on sheet length)
Thickness of laminating film	24-50 μm
Kind of laminating film	OPP, PET, Nylon
Time of laminating roll warm up	Approx. 4 min (EU)
Sheet overlap accuracy	± 1 mm
Machine dimensions incl. table	289 × 100 × 147 cm
Machine dimensions incl. stacker	356 × 125 × 147 cm
Air supply	Min. 6 bar
Consumption of compressed air	20 l/min
Max. consumption of compressed air	30 l/min
Max. pressing force	15 kN
Max. consumption of electricity	26.8 N/mm
Max. spotřeba el. energie	7 kW
Power supply	7 kVA
Machine weight	561 kg
Recommended machine capacity	100 000 sheets/month

Parametr	Hodnota
Max. rychlost laminace	15 m/min
Max. výkon nakl. hlavy	N/A
Min. rozměr archů	20 × 20 cm
Max. rozměr archů	52 × 74 cm
Hmotnost archů	115-350 g/m²
Max. výška stohu nakladače	3 cm
Tloušťka laminovací fólie	24-50 μm
Typ laminovací fólie	OPP, PET, Nylon
Čas vytopení laminovacího válce	cca 3.5 min
Přesnost přesahu archů	±2 mm
Rozměry stroje včetně stolu	256 × 122 × 160 cm
Rozměry stroje včetně stohovače	356 × 122 × 160 cm
Vzduchová přípojka	Min. 6 bar
Spotřeba tlakového zduchu	10 l/min
Max. spotřeba tlak. vzduchu	10 l/min
Max. přítlačná síla	20.5 kN
Max. lineární tlak v nipu	39.4 N/mm
Max. spotřeba el. energie
Příkon	5,5 kVA
Hmotnost stroje	445 kg
Doporučené zatížení stroje	100 000 archů/měsíc

Custom-built solutions

Machine Amiga 52 with modification for embossing (solution with replaceable laminating cylinder) is custom-built only. The technical parameters can differ from standard configuration.
Possibility of individual machine modification based on specific requirements.

Downloads

Amiga 52 brochure

For other brochures please visit the download section.

* Technical parameters of our products are subject to change without prior notice.
* Product pictures/videos may show additional options not included in the standard delivery.